WagonRFix

U0101 – Lost Communication With TCM

System
Network
Dashboard light
Check engine light (MIL)
Check-engine blink code
—
Applies to
Generic OBD-II meaning. Not every code is used by this car.
Description
Lost Communication With TCM
Detection / symptoms
1.Check engine light on 2.Vehicle will not shift 3.Vehicle stays in one gear (usually 2nd or 3rd)
Possible causes
1.Typically the causes for this code to set are 2.Open in the CAN bus + circuit 3.Open in the CAN bus - circuit 4.Short to power in either CAN bus circuit 5.Short to ground in either CAN bus circuit 6.Rarely - faulty control module
What to check
1.Check battery voltage and the main fuses 2.Check the connectors of the module named in the code 3.Read codes from all modules with a capable scanner
Confidence
medium (generic OBD-II definition, not checked against the factory manual for this car)

Generic OBD-II meaning (obd-codes.com), not checked against this car's factory manual. Clear the code and test-drive to confirm it returns. Search all fault codes · Common problems · Warning lights

← U0100