P0341 – Camshaft Position Sensor Circuit Range/Performance
- System
- Engine
- Dashboard light
- Check engine light (MIL)
- Check-engine blink code
- —
- Applies to
- Generic OBD-II meaning. Not every code is used by this car.
- Description
- Camshaft Position Sensor Circuit Range/Performance
- Detection / symptoms
- 1.Check engine light on 2.The car will likely run with this code set, as it is often intermittent and 3.Also because the PCM can often operate the vehicle in "limp-in/limp-home" 4.Mode even with a cam sensor signal problem. There may be no noticeable symptoms 5.Other than 6.Poor fuel economy (if engine runs)
- Possible causes
- 1.Cam sensor wiring routed too close to spark plug wiring (causing interference) 2.Poor wiring connection at cam sensor 3.Poor wiring connection at PCM 4.Bad cam sensor 5.Damaged reluctor wheel
- What to check
- 1.Read the code and freeze-frame data with an OBD-II scanner 2.Check the connector and wiring of the part named in the code 3.Test the part with scanner live data or a multimeter, using the values in the repair manual 4.Fix the cause, clear the code and test-drive
- Confidence
- medium (generic OBD-II definition, not checked against the factory manual for this car)
Generic OBD-II meaning (obd-codes.com), not checked against this car's factory manual. Clear the code and test-drive to confirm it returns. Search all fault codes · Common problems · Warning lights