P0335 · blink 13 – Engine Revolution Sensor Circuit Malfunction
- System
- Engine control (EFI)
- Dashboard light
- Check engine light (MIL)
- Check-engine blink code
- 13
- Applies to
- 1KR-FE: M300 (Sirion export = JDM Boon M300S/M301S(4WD? see gaps) & Passo KGC10/KGC15). JDM-spec ECU not separately documented | K3-VE: M301 (Sirion 1.3 = JDM Boon M310S? / Passo QNC10)
- Description
- Engine Revolution Sensor Circuit Malfunction
- Detection / symptoms
- Detection: 1.No revolution signal is inputted, even once, while the cranking is continued for several seconds.
- Possible causes
- Trouble area: 1.Open wire or short circuit for engine revolution sensor system circuit 2.Engine revolution sensor 3.EFI ECU
- What to check
- Checking points: 1.Is the signal from the engine revolution sensor inputted to the EFI ECU? 2.Is the harness between the engine revolution sensor and the EFI ECU normal? 3.Is the output of the engine revolution sensor normal?; Unit check B8-219: crank (engine revolution) sensor N1+/N1- 2150+/-300 ohm @20C
- Confidence
- high (factory manual, export spec)
From the factory service material. Clear the code and test-drive to confirm it returns. Search all fault codes · Common problems · Warning lights