P1300 · blink 36 – Ion Current Combustion Control System

System: Engine control (EFI)
Dashboard light: Check engine light (MIL)
Check-engine blink code: 36
Applies to: 1KR-FE: M300 (Sirion export = JDM Boon M300S/M301S(4WD? see gaps) & Passo KGC10/KGC15). JDM-spec ECU not separately documented | K3-VE: M301 (Sirion 1.3 = JDM Boon M310S? / Passo QNC10)
Description: Ion Current Combustion Control System
Detection / symptoms: Detection: 1.After the engine has been warmed up, when the signal from the ion current combustion control system is not inputted to the EFI ECU while the engine is running 2.After the engine has been warmed up, when the signal from the ion current combustion control system is inputted continuously to the EFI ECU while the engine is running 3.When the signal f
Possible causes: Trouble area: 1.Open wire or short circuit for ion system circuit 2.Ignition coil 3.Spark plug 4.EFI ECU
What to check: Checking points: 1.Is the ignition system normal? 2.Is the signal from the ion current combustion control system normal? 3.Is the combustion system normal? 4.Is the harness between the ignition coil and the EFI ECU normal? 5.Is the ignition coil is normal? 6.Is the EFI ECU normal?
Confidence: high (factory manual, export spec)

From the factory service material. Clear the code and test-drive to confirm it returns. Search all fault codes · Common problems · Warning lights